Known for exceptional quality, Standart PRO sinks feature contemporary tight-radius corners and channel grooves designed for superior drainage. Convenient drop-in design can be installed with any type of kitchen counter for a beautifully finished look.
KITCHEN SET INCLUDES: Sink, bottom grid x2, drain assembly x2, removable drain cap x2, Kraus kitchen towel, mounting hardware, cutout template
DROP-IN SINK DESIGN allows for topmount installation with any type of kitchen counter
ULTRA-SLIM LOW DIVIDER with a height of 6" offers the openness of a single bowl sink, with extra clearance for washing sheet trays and long handled pans while preventing overflow onto your kitchen counter
EXTRA-THICK 4mm (8-gauge) DECK with beveled edge sits flush against the countertop, and allows you to wipe water and crumbs directly into the sink
TIGHT-RADIUS CORNERS designed for a contemporary look and easy cleaning
DURABLE AND DENT-RESISTANT sink made with premium TRU16 real 16-gauge T304 stainless steel
STAINLESS STEEL BOTTOM GRID: Custom-fit dishwasher-safe grid/dish rack protects sink surface and keeps dishes elevated for optimal draining
HIGH CAPACITY SINK: Extra-deep 50/50 double bowl design makes your kitchen workspace more versatile, and fits your biggest pots and stacks of dishes
ENGINEERED FOR EASY DRAINING with rear-set drain opening and channel grooves to keep sink free of standing water
DECORATIVE DRAIN COVER: CapPro conceals drain assembly and garbage disposal for a seamless look
FULLY INSULATED WITH NOISEDEFEND: Extra-thick pads cover all sides of the sink to absorb unwanted noise and vibration
NON-TOXIC UNDERCOATING: Prevents condensation and creates a moisture barrier that protects the sink and base cabinet from damage
LONG-LASTING RUST-RESISTANT FINISH will not dull from daily use
2 PRE-DRILLED HOLES for faucet and soap dispenser installation
LIFETIME LIMITED WARRANTY: Satisfaction guaranteed with customer service that puts you first
OUTER SINK DIMENSIONS: 33 in. L x 22 in. W x 10 in. D; Minimum Cabinet Size: 36 in.
CERTS: ASME A112.19.3-2008/CSA B45.4-08, Uniform Plumbing Code (UPC), National Plumbing Code of Canada, International Plumbing Code (IPC)
KITCHEN SET INCLUDES: Sink, bottom grid x2, drain assembly x2, removable drain cap x2, Kraus kitchen towel, mounting hardware, cutout template
DROP-IN SINK DESIGN allows for topmount installation with any type of kitchen counter
ULTRA-SLIM LOW DIVIDER with a height of 6" offers the openness of a single bowl sink, with extra clearance for washing sheet trays and long handled pans while preventing overflow onto your kitchen counter
EXTRA-THICK 4mm (8-gauge) DECK with beveled edge sits flush against the countertop, and allows you to wipe water and crumbs directly into the sink
TIGHT-RADIUS CORNERS designed for a contemporary look and easy cleaning
DURABLE AND DENT-RESISTANT sink made with premium TRU16 real 16-gauge T304 stainless steel
STAINLESS STEEL BOTTOM GRID: Custom-fit dishwasher-safe grid/dish rack protects sink surface and keeps dishes elevated for optimal draining
HIGH CAPACITY SINK: Extra-deep 50/50 double bowl design makes your kitchen workspace more versatile, and fits your biggest pots and stacks of dishes
ENGINEERED FOR EASY DRAINING with rear-set drain opening and channel grooves to keep sink free of standing water
DECORATIVE DRAIN COVER: CapPro conceals drain assembly and garbage disposal for a seamless look
FULLY INSULATED WITH NOISEDEFEND: Extra-thick pads cover all sides of the sink to absorb unwanted noise and vibration
NON-TOXIC UNDERCOATING: Prevents condensation and creates a moisture barrier that protects the sink and base cabinet from damage
LONG-LASTING RUST-RESISTANT FINISH will not dull from daily use
2 PRE-DRILLED HOLES for faucet and soap dispenser installation
LIFETIME LIMITED WARRANTY: Satisfaction guaranteed with customer service that puts you first
OUTER SINK DIMENSIONS: 33 in. L x 22 in. W x 10 in. D; Minimum Cabinet Size: 36 in.
CERTS: ASME A112.19.3-2008/CSA B45.4-08, Uniform Plumbing Code (UPC), National Plumbing Code of Canada, International Plumbing Code (IPC)
-
What is the minimum required cabinet size?
-
36" This is to ensure there is enough space within the cabinet for the sink and the included mounting hardware.
-
Can I install a garbage disposal to this sink?
-
Yes, garbage disposals are 100% compatible with our sinks. Rather than install a disposal to the drain, the disposal will replace the drain as it has its own flange and mounts directly to the sink.
-
Does it matter on which side I install a disposal?
-
A garbage disposal can be installed on either side and is a matter of preference.
-
How high is the middle sink divider?
-
Approximately 6"
-
Are the sink grids dishwasher safe?
-
Yes, the sink grids are 100% dishwasher safe.
-
What is the chromium to nickel ratio?
-
The Chromium to Nickel ratio is 10:18
-
What is the steel gauge?
-
TRU 16 Gauge
-
How far back is the sink wall from the center of the drain?
-
4 1/2"
-
Can I install this sink in a laminate countertop?
-
Our undermount sinks are best suited for solid surfaces countertop materials like marble concrete, soapstone and granite. Not well suited for laminate or tile counters which have too many weak points along seams and grout lines to support the weight of the sink.
-
Does the bottom have a slope?
-
Yes, our sinks are engineered with 1/8" slope to easily help guide water towards the drain.
-
Are the sink grids dishwasher safe?
-
Yes, the sink grids are 100% dishwasher safe.
-
Can I purchase additional feet and bumpers for my sink grid?
-
Yes, you can purchase additional grid feet and bumpers by contacting us directly at 800-775-0703 or via email at customerservice@kraususa.com
-
Is there sound dampening material?
-
Yes, this sink includes NoiseDefend Soundproofing technology and offers extra thick pads covering over 80% of the sink and non-toxic undercoating for added insulation.
-
What should I use to clean the sink?
-
We recommend using mild soap and water for everyday cleaning as well as stainless steel cleaners designed for cleaning stainless steel specifically. A popular option is Barkeeper's Friend and a 3M Fine Scotch Brite Pad
-
Are there any products that should be avoided when cleaning my sink?
-
We recommend avoiding cleaners with harsh chemicals like chlorine, bleach, ammonia as these items can cause damage to the sink surface.
-
How can I remove scratches from my sink?
-
Scratches are inevitable in any sink material, including stainless steel. These are merely usage scratches over time, these scratches will become uniform with the sink's grain and blend into the overall finish of your sink with proper cleaning. Most minor scratches can be softened with a fine (white) 3M Scotch Brite pad, or 3M Scotch Brite Natural Fiber Non-Scratch Scour Pad, accompanied by a deep cleansing agent such as Bar Keepers Friend.
-
What does "KHT" stand for?
-
Kraus Handmade Topmount
-
Can stainless steel sinks rust?
-
No. Typically, when red spots appear on a Stainless Steel Sink it is simply surface discoloration due to iron and mineral deposits in the water. This is usually taken care of permanently with a stainless steel polish and/or cleaner when used according to the directions of the cleaning product. Products such as Bar Keeper's friend and a fine 3M Scotch Brite pad are both great options.
-
Is it recommended to drill additional holes in my stainless steel sink?
-
We do not recommend making additional holes in a stainless steel sink as it could potentially damage and compromise the integrity of the sink.
-
Sink Color Finish: Stainless Steel
-
Sink Material: Stainless Steel
-
Sink Type: Top-Mount / Drop-In
-
Bowl Configuration: Double Bowl
-
Minimum Cabinet Size: 36"
-
Sink Gauge: 16
-
Soap Dispenser Included: No
-
Escutcheon Plate Included: No
-
Sink Length Range: 31-35”
-
Bottom Grid Included: Yes
-
Bowl Depth Range: 9"-10"
-
Faucet Holes: 1